Bimini Tops - 74 - Page 2 - Extreame Savings! Save up to 46%
Extreame Savings! Up to 46% off on Bimini Tops at Zvejo Tribuna, Page 2. Top brands include Pactrade Marine, MIZUGIWA, Aurora, Homyl, Marine Part Depot, MonkeyJack, Inflatable Boat & Marine USA, Blovec, Mizugiwa, MxEol, MagiDeal, Eevelle, & Amadget. Hurry! Limited time offers. Offers valid only while supplies last.
2 PCS MARINE BOAT BIMINI TOP CANOPY FITTINGS SS 316 TOP JAW SLIDE 3/4" 19MM
4.4 out of 5 stars with 149 reviews
This is a set of 2 Top Jaw Slides for Bimini Top or Canopy Fittings that is formed and polished from type 316 stainless steel for appearance and durability. It has a mirror-polished surface. The pipe's overall diameter is to be 3/4'', which is 19mm. The stainless steel surface provides maximum corrosion resistance and durability. We also have different measurements for top fittings. Check out our store to find out more about the top fitting that suits your application! Item: P80152-01X2This is
MIZUGIWA Bimini Eye End Top Caps Tube 1" Heavy Duty Fitting Hardwares Marine Stainless Steel
You Save: 45%
mpn: XHL0401A, ean: 0603161961779,
4.0 out of 5 stars with 20 reviews
2 PCS Eye End Cap Bimini Top Fitting / Hardware 1'' Marine Stainless Steel They fit 1'' O.D. round tube and have a ¼'' pin. Stainless steel ensures that the shape remains intact at loads that meet or exceed the deformation point (unlike cast stainless steel).Bimini Top Caps, External Eye Ends 1''. Marine 316 Stainless Steel Ultimate corrosion resistant. 2 pieces included.
Bimini Top Pull Pin Stainless Steel 1/4" Dia.
You Save: 32%
4.4 out of 5 stars with 39 reviews
This is a Stainless Steel 1/4'' Diameter Quick Release pin with ball catch. This is used for quick release of a Bimini Top. It comes with a 6'' stainless nylon coated lanyard with tab to secure it to the boat. The grip range is 7/8''. It will be sold by the pair as the picture shows.Stainlesss steel Bimini top pull pin with ball lock.
Homyl 2 Pieces Quick Release Pin 5/16'' with Spring Marine Grade Stainless Steel for Bimini Top
You Save: 44%
mpn: 5c93804325165cdb8e28ea6cec7ab1fe, ean: 0753123504985,
4.1 out of 5 stars with 7 reviews
Description: - Quick release pin for boat, bimini top, deck hinge - Marine grade 316 stainless steel construction - Superior corrosion resistance and durability in saltwater environment - Spring loaded ball in the tip of the pin holds it in place - Widely used in various shipbuilding, ship outfittingSpecification: - Material: 316 Stainless Steel - Color: Silver - Pin Length: Approx. 3'' / 76mm - Pin Diameter: Approx. 5/16'' / 8mm - Ring Diameter: 1.1'' / 28mmPackage Includes:4 Pieces Quick
MonkeyJack 2 Pieces Marine 316 Stainless Steel Side Mount Deck Hinge Boat Bimini Top Fitting Hardware
mpn: unknown, ean: 0099651840462,
4.0 out of 5 stars with 77 reviews
Description: - Marine grade 316 stainless steel - Measures 2'' length x 7/8'' width x 1'' height - Superior corrosion resistance and durable in the saltwater environment - High polished to a beautiful mirror-like finish - Side mount deck hinge for Bimini topsPackage Includes:2 Pieces Deck HingesMarine grade 316 stainless steel. Measures 2'' length x 7/8'' width x 1'' height. Superior corrosion resistance and durable in the saltwater environment. High polished to a beautiful mirror-like finish.
Stainless Steel Bimini top Taco style Ball and Socket Concave Deck Hinge
4.7 out of 5 stars with 102 reviews
This is a single stainless steel Taco style Ball and Socket Deck Hinge . This is made by Taco. It is concave for mounting on a rounded surface. It has a lanyard to prevent the ball from coming out. We use this to make Bimini Tops.Stainless steel Bimini top Taco style ball and socket Concave deck hinge.
Bimini Top Jaw Slide - Hinged with Quick Release Pin- 7/8" Hardware Fitting Marine Stainless Steel
By Inflatable Boat & Marine USA
mpn: unknown, ean: 0641612986667,
4.0 out of 5 stars with 132 reviews
Bimini Jaw Slide Hinged Fitting with Quick Release Pin - For 7/8'' tubing... Marine 316 Stainless Steel... Note: Tube sizing is critical... Outside diameter must be exactly 7/8''.... if over 7/8'' even if very slightly, these Jaw Slides will not fit... Sold per 1 each - Photo of 2 is for illustration purposes only.... PLEASE NOTE: Other sellers offering a similar item under our brand name, Inflatable Boat & Marine are not supplied by our company and we offer no guarantee for their product.
Quick Release Pin 1/4" with Lanyard Stainless Steel Bimini Marine Set of 4
4.3 out of 5 stars with 38 reviews
- Quick release pin for boat top deck hinge or boat jaw slide clamp bracket. - Comes with 16cm wire lanyard to prevent loss. - Marine grade cast solid 316 stainless steel construction. - Provides maximum corrosion resistance and durability in marine environment. - Widely used in various ship building, ship outfitting, deck fitting. Specification: - Material: 316 Stainless Steel - Color: Silver - Pin Diameter: Approx. 6 mm/0.24 inch - Pin Length: Approx. 33 mm/1.3 inch - Lanyard Length: Approx.
Mizugiwa Quick Release Bimini Top Swivel Hinge Deck Side Mount 316 Stainless Steel Pair
You Save: 46%
4.6 out of 5 stars with 14 reviews
This is used to mount a Bimini Top to a boat. It can be used on the top of the gunnel or on the side. It has a quick release stud and is almost flush with the fiberglass. These are sold individually. The picture shows two so you can see how the stud comes out. Each Qty ordered will get ONE unit.Stainless Steel Bimini Top Side Mount Bracket. Low profile Quick Release 316 stainless steel hinge. The hinge snaps into base and stays attached to bimini when seperated.. Easily remove or install top
7/8" Boat Ladder Locking Brace Flip up ladder latch
4.2 out of 5 stars with 66 reviews
These braces clip to the Bimini to legs to prevent it from shaking and making noise. These are braces fit 7/8'' tubing. They are sold as the picture shows. By the pair.Boat Ladder Locking Brace Flip up for Ladder 7/8''.
Boat Cover Support Pole Size Small
4.4 out of 5 stars with 99 reviews
This support pole is adjustable between 15'' and 30''. It has a snap in the top and will snap to a female snap sewn to a cover. Upon request we can send a post to be used with a grommet hole in the cover. This will be sold as a single unit.Small Support Pole for Boat Cover.
MxEol Boat Top Fittings Hardware Combo Black Nylon Bimini Caps Jaw Slides Deck Hinges Pad Eye w/Screws 22 PCS (Black, 1 inch)
mpn: unknown, ean: 0611745867225,
4.3 out of 5 stars with 193 reviews
MxEol boat nylon bimini top fittings hardware combo. Material: black nylon. Size: 1 inch or 7/8 inch. The bimini hardware combo included 24 pcs totally with screws. Bimini fittings: 10 pcs nylon eye end caps, 8 pcs nylon jaw slide fittings, 4 pcs nylon deck hinge fittings, and 2 pcs pad eye tie down with 12 pcs screws. Ideal for your boat top covers.Bimini top fittings hardware combo black nylon 24 pcs totally. Boat black nylon bimini fittings combo 24 pcs ideal for most of boat top covers.
MagiDeal 2 Pieces 316 Stainless Steel Bimini Top Deck Hinge Side Mount for Marine, Boats, Canopy Tops
You Save: 37%
mpn: STK0119386073, ean: 0099651819581,
4.4 out of 5 stars with 48 reviews
Description:Marine grade 316 stainless steelMeasures 2'' length x 7/8'' width x 1'' heightSuperior corrosion resistance and durable in the saltwater environmentHigh polished to a beautiful mirror-like finishSide mount deck hinge for Bimini topsPackage Includes:2 Pieces Deck HingesMarine grade 316 stainless steel. Measures 2'' length x 7/8'' width x 1'' height. Superior corrosion resistance and durable in the saltwater environment. High polished to a beautiful mirror-like finish. Side mount deck
MxEol Stainless Bimini Top Pin w/Spring 1/4" x 1" Grip Pack of 10
mpn: unknown, ean: 0611745867171,
4.2 out of 5 stars with 22 reviews
MxEol stainless steel boat pin is made of marine grade 316 stainless steel which are quick release toggle pin for bimini top deck hinges. Pack of 10Stainless steel boat pin w/ spring 1/4'' x 1'' grip. Bimini top hinge toggle pin are made of 316 stainless steel. Bimini pin quick release stainless steel. Bimini top pins for bimini top fittings. Boat pin bimini, clevis pin, Pack of 10.
Bimini Top Stainless Steel Eye End Ball 7/8" Drilled for a Rivet
You Save: 4%
4.9 out of 5 stars with 16 reviews
This is a single stainless steel 7/8'' Eye End or top cap. It is drilled for a rivet and has one allen set screw to hold the tube. We use this to make Bimini TopsStainless steel Bimini top eye end.
Eevelle Summerset Boat Bimini Frame Accessory Clips (Set Of 2) - Black
mpn: unknown, ean: 0692089324261,
4.7 out of 5 stars with 276 reviews
SUMMERSET 3 BOW BIMINI ACCESSORY CLIPS These clips are a quick and easy way to add function to your bimini frame and enjoyment to your day on the water. They are fully adjustable, multifunction clips that attach anywhere on your bimini frame. Use to attach accessories such as flashlights or create a towel bar to dry your towels. ROUND FRAME BIMINI CLIP FEATURES The clip has 2 adjustable clamps. One goes around the round frame of the bimini and the other secures your accessory to the pole. A 360
Amadget 2 PCS 3/4'' Bimini Top Caps Tube Canopy Hardware, Eye End Top Fitting Marine 316 Stainless Steel
4.0 out of 5 stars with 15 reviews
Description: -Brand new stainless steel bimini top caps, can be used with other boats. -Made of AISI stainless steel 316 -Surface polishing -Lost Wax Process For pipe: 3/4''One pair stainless steel Bimini top caps, fits 3/4''(19MM) OD round tubing. Ultimate corrosion resistant with great polished finish. 316 stainless steel construction. 2 pieces included, high qulity.
Browse Our Catalog